Whirlpool error codes
Pick your appliance to see every Whirlpool code we explain.
Whirlpool dishwasher codes
- F4 E3: Heating error: Whirlpool's help pages tie F4E3 to heating the wash water
- F6 E4: Water float switch: the overfill float has tripped, often because the dishwasher is not level
- F8 E4: Water detected in the drip tray: a leak or overflow has reached the base under the tub
- F9 E1: Long drain: the dishwasher could not pump the water out properly
Whirlpool washer codes
- F5 E3: Door lock error: the door or lid lock is not locking or releasing as it should
- F7 E1: Motor speed error: the motor cannot reach the speed the selected cycle needs
- F9 E1: Long drain: the washer is taking too long to pump the water out, or cannot pump it out
- LF: Long fill: the washer is taking too long to fill, or is not sensing enough incoming water
- Sd: Excess suds: the washer found too much foam and is running a suds reduction routine
