LG Dryer Error Code CL: Won't Start? Turn Off Child Lock

Low urgencyUpdated Checked against LG USA Support

Error code CL on an LG dryer means Child Lock is on; it is not a fault. The panel ignores the buttons and the dryer won't start until you cancel the lock. With the dryer powered on, press and hold the Child Lock button, or the two buttons marked with a lock, for 3 seconds. Unplugging won't clear it.

What to try first

  1. 1

    Switch the dryer on

    Press Power so the display lights up. LG's instructions start with the dryer powered on; holding the lock button on a dark panel does nothing.

  2. 2

    Find the lock button on your panel

    Look for a button labeled Child Lock or Control Lock, or a small padlock icon printed under one button or between two. If your dryer has no dedicated button, LG's error code list for its Africa sites says to hold Temp and Time Dry together. Your owner's manual names the exact button for your model.

  3. 3

    Hold it for 3 to 5 seconds

    Press and hold the button, or both buttons at the same time, until CL and the lock icon go out. LG's US pages give 3 seconds for most models and up to 5 seconds on others, so keep holding a moment longer if CL is still lit.

  4. 4

    Pick a cycle and start

    Turn the dial to a dry cycle first, then choose any options and press Start. If an option button only rings, a cycle has not been chosen yet.

  5. 5

    Reset the control panel if the buttons stay dead

    If CL is gone but the panel still will not respond, use LG's control panel reset: turn the dryer off, unplug it or switch off its breaker, hold Start/Pause for 5 seconds, then restore power and switch the dryer on.

Most likely causes of CL

  1. 1. The lock was set during an earlier cycle and never cancelled (most common)

    CL is on the display as soon as you press Power, before anyone has touched another button, and nobody remembers setting it.

  2. 2. Holding the wrong button, or the right one too briefly (common)

    You held a button and CL stayed lit. Your panel has no button labeled Child Lock, or the lock icon sits under a pair of buttons rather than one.

  3. 3. Trying to cancel the lock with the dryer switched off (common)

    The display is dark or asleep while you hold the buttons. The lock can only be cancelled with the dryer powered on.

  4. 4. An option button pressed before a dry cycle was chosen (less common)

    There is no CL on the display, but an option button rings and does nothing because no cycle was selected on the dial first.

  5. 5. A faulty lock button or control panel (less common)

    You hold the correct button for your model for a full 3 to 5 seconds with the power on, and CL never goes out.

When to call a pro

  • CL will not go out when you hold the correct button for your model with the dryer on. LG's WashTower guide says a lock button that does not work may indicate a malfunction and points you to LG Support.
  • The panel still ignores every button after CL is gone and the control panel reset is done.
  • The display stays dark when you press Power, even with the plug secure and the breaker on.

What a CL repair costs

$0: no repair needed

Turning off Child Lock costs nothing; no part has failed. LG names no part for a lock that will not cancel, and HomeGuide's 2026 national list has no line for a lock button or keypad. If you need a visit, its minimum service fee of $70 to $130 covers the first hour.

Source

Why an LG dryer error code CL is not a breakdown

LG puts CL in its dryer error code list, which is why people search for it as an error. The list itself says CL is not actually an error code but a sign that Child Lock is active. LG describes the feature as a way to keep children and others from changing the cycle settings while the dryer runs.

So nothing about the heat, the drum or the venting is wrong. The control panel is simply refusing input. That is also why the dryer won't start: LG says you cannot start the machine until the child lock is turned off.

Why unplugging the dryer does not reset CL

Turning the power off is the usual reset for a stuck appliance, and it does not work here. LG says the child lock stays on at the end of the cycle, even when the machine is powered off. LG's Hong Kong help page puts it the same way: the lock continues after the dryer is switched off and on again.

LG does publish a control panel reset, where you unplug the dryer and hold Start/Pause for 5 seconds. That is meant for a panel that has frozen, and LG does not list it as a way to cancel Child Lock. The only way out of CL is the same button hold that set it, done with the power on.

How CL got there when nobody set it

LG notes that the lock can only be switched on while a dry cycle is running. If CL greets you on a fresh load, someone set it during an earlier cycle, and it stayed set after that load finished.

During a cycle the lock looks different. LG's Hong Kong page says that when a locked dryer is running, pressing a button makes a sound and the display flashes CL along with the remaining drying time. The load keeps drying; only the buttons are ignored.

Which buttons turn it off depends on the panel

LG's US help pages describe a key labeled Child Lock on most models. Dryers without one use two buttons held together, marked with a padlock symbol, and LG's Africa error code list names Temp and Time Dry for that case. On a WashTower, LG's guide refers to a button marked Control Lock.

Outside the US the pairs vary even more. LG's Hong Kong page lists combinations such as Dry Level with Dry Temperature, More Time with Less Time, and Time Dry with Drum Light on different models. If the button you tried did nothing, check the panel for the padlock icon before assuming a fault.

What a technician will check

  • The lock button and the keypad around it, to see whether the button registers a press at all.
  • Whether the control panel accepts any input after a full power reset, which separates a stuck lock from a panel that has stopped responding.

What fixed it for other readers

No reader fixes yet. If you cleared CL, tell others what worked.

Reader fixes are shared by visitors and checked for safety, not tested by us.

Did you clear CL? Tell the next person what worked.

We publish your first name or initial, the month, and your fix. Nothing else.

Questions people ask about LG CL

What is the CL error code?

On LG dryers, CL stands for Child Lock, which LG also calls Control Lock. It is shown on the display to tell you the panel is locked. LG says it is not actually an error code, so there is nothing to repair.

How do I unlock an LG dryer?

Switch the dryer on, then press and hold the Child Lock button, or the pair of buttons with the padlock icon, for 3 to 5 seconds until CL goes out. On models with no lock button, LG's Africa error code list says to hold Temp and Time Dry together.

How do I turn Child Lock back on?

Start a dry cycle first, then hold the same button or buttons for 3 to 5 seconds until CL appears. LG says the lock can only be switched on with a dry cycle in progress, and it will stay on after that load until you cancel it.

Sources